INSTALLATION INSTRUCTIONS
WARNING ! SHUT OFF POWER AT FUSE OR CIRCUIT BREAKER.
Fixture Name: Valencia 2049-4P/6/9/M1L FB
For Customer Service, contact the place of purchase to arrange for replacement parts.
YOUR INSTALLATION IS NOW COMPLETE.
RETURN POWER TO THE JUNCTION BOX AND
TEST THE FIXTURE.
For Pendant Light Fixture
Fig. 1
BARE COPPER
(or Green)
GREEN
(Ground)
FIXTURE WIRES
SMOOTH ( or BLACK)
RIBBED ( or WHITE)
BLACK
(Hot)
WHITE
(Netural)
HOUSE WIRES
G
CHAIN
J
H
F
E
D
JUNCTION BOX
(CEILING)
A
C
B
HANGING THE FIXTURE (Fig. 1)
1. Carefully remove the new fixture from the carton and
the yellow bag that holds all parts. Check that all parts
are included as shown in the illustration and parts list.
2. Shut off the power at the circuit breaker and remove
old fixture from ceiling, including the old mounting strap.
3. Thread Nipple(C) into Canopy Loop (F) until snug.
4. Thread other end of the Nipple (C) with Canopy Loop
attached into Mounting Strap (D).
5. Place Lock Washer (B) over end of Nipple (C)
protruding through Mounting Strap (D) and thread Hex
Nuts (A) onto Nipple until tight.
6. Take this mounting strap assembly and mount to
ceiling junction box with Mounting screws (E). Tighten
screw securely with screw driver.
7. Unscrew the Canopy loop collar(H ) from the
Canopy loop. Take the canopy and pass over the
Canopy loop. approximately one half of the canopy loop
exterior threads should be exposed. Adjust until desired
height is reached. *the Canopy loop collar should fit
snugly on the Canopy loop after the canopy is installed.
Remove Canopy and Canopy lock collar.
8. Assemble the fixture and have an assistant or secure
support hold the weight of the fixture while you complete
the wiring connections.
9.Thread the fixture wires and ground wire of the
assembled fixture through the canopy loop and nipple
and into the outlet box.
CONNECTING THE WIRES (Fig 2)
10. Attach the power supply wires to the fixture
lead
wires by connecting BLACK to BLACK (or SMOOTH)
and WHITE to WHITE (or RIBBED).
11. Attach the GROUND wire(GREEN or COPPER)
from the Junction Box and the fixture Ground wire to the
green Ground Screw on the Mounting Bracket (D) or
connect both wires together using the correct size of
wire connectors.
NOTE: Twist the wires together in the same direction
you twist the wire connector onto the wires.
12. Tuck these wire connections neatly into the
Junction Box.
FINISHING THE INSTALLATION
13. Raise the Canopy (G) to the ceiling. Secure in
place by tightening the Canopy Loop Collar (H) onto the
Canopy Loop (F).
(3 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals