Assembly Instructions: 2074-BA1 CH (Smyth II)
IMPORTANT:
• ALL INSTALLATION WORK SHOULD BE DONE BY ACCREDITED PROFESSIONAL.
• SHUT OFF POWER SUPPLY AT FUSE OR CIRCUIT BREAKER!
• USE ONLY THE SPECIFIED BULBS. DO NOT EXCEED THE MAXIMUM WATTAGE!
PREPARING FOR INSTALLATION
Remove all of the contents from the carton. See the important
notes above. Shut off the power at the circuit breaker and
completelyremovetheoldxturefromthewall,includingthe
oldmountingstrap.
Mountingstrap(B)containsseveralpairsofthreadedholes.
Findthepairofholesthatmatchesthespacingoftheholeson
thejunctionboxandyourxturebackplate.Twoofmounting
screws(A)shouldbeattachedtomountingstrap(B).You
mayneedtotightenthenutsthatholdthesescrewsinplace.
Pullthehousewiresthroughthecenterofmountingstrap
(B),placemountingstrap(B)overthejunctionboxsothat
mountingscrews(A)arehorizontal,andinalignmentwith
theholelocationsonxturebackplate(F).Securemounting
strap(B)tothejunctionboxwithmountingscrews(D)anda
screwdriver.Tightenthescrewssecurely.
CONNECTING THE WIRES
Attachthexture’swirestothepowersupplywiresfromthe
junctionbox.Connectblacktoblack(orsmooth);whiteto
white(orribbed);groundtoground(greenorcopper).Twist
theendsofthewirepairstogether,thentwistonawire
connector. Make sure all twists are in the same direction. If
thereisnogroundwire(greenorcopper)fromthejunction
box,locategroundscrew(E)onmountingstrap(B)andwrap
thexturegroundwirearoundthegreengroundscrew(E).Use
ascrewdrivertosecuregroundscrew(E)ontothemounting
bracket.Tuckallwiresneatlyintothejunctionbox.
FINISHING THE INSTALLATION
Placexturebackplate(F)overmountingscrews(A)sothat
theyprotrudethroughtheholesinthefrontofthebackplate.
Threaddeconuts(G)ontomountingscrews(A).Twistuntilthe
backplateofthextureissnugagainstthewall.
Installtheprovidedhalogenbulbinaccordancewiththe
xture’sspecications.
Bulb Note: Use a tissue or paper towel to hold the bulb and
push the bulb down into the socket. Oils and dirt can cause
thebulblifetoshorten.Rubbingalcoholisrecommendedfor
cleaningthebulbs.
Slideglassshade(H)overthesocketandtwisttosecurein
place.
Your installation is now complete. Turn on the power and test
thexture.
CLEANING TIPS
Treat the xture gently! Regular cleaning will reduce the need for deep cleaning. For regular cleaning, turn off the light and wipe down
the xture with a clean lint-free cotton or microber cloth. Never spray cleaner directly onto the xture. For deep cleaning, turn off the
light and remove the glass prior to cleaning. Place the glass shade aside to clean. Hand wash glass with warm water and mild deter-
gent. Dry with a lint-free or microber cloth.
BLACK
(Hot)
WHITE
(Neutral)
GREEN
(Ground)
HOUSE WIRES
SMOOTH
(Or Black)
FIXTURE WIRES
RIBBED
(Or White)
BARE COPPER
(Or Green)
For Customer Service, contact
the place of purchase to arrange
for replacement parts.
B
C
D
E
G
H
F
A
Comments to this Manuals