Golden-lighting 1821-6 BI User Manual download pdf (Page 2)

For Customer Service, contact the place of purchase to arrange for replacement parts.

7. Slip Canopy loop collar (H) over the chain, then do the

same with the canopy (G).

8. When ready to complete the installation Use the other

chain connector and attach the other end of the chain to

the canopy loop (F) and close the chain connector.

9. Make sure the weight of the chandelier will be

supported by the chain-not the electrical wire.

* You may now install the fixture.

Fig. 2

PARTS & ASSEMBLY SHEET

Fixture Name:

Madera 1821-6 BI

ASSEMBLING THE FIXTURE (Fig. 2)

4. By measuring determine correct number of links

needed for proper hanging height. Use a pair of

pliers to open one link of the Chain (K) then remove

the excess Chain (K) and discard it.

5. Use one chain connector (L) to attach one end of

the chain to the Top loop (J) and close the chain

connector.

6. Feed the fixture wires through the Chain (every

three links) and pull the wires until taut.

7. Slip Canopy loop collar (H) over the chain,

then do the same with the canopy (G).

8. When ready to complete the installation Use the

other chain connector and attach the other end of

the chain to the canopy loop (F) and close the

chain connector.

9. Make sure the weight of the chandelier will be

supported by the chain-not the electrical wire.

* You may now install the fixture.

Note: Complete these remaining steps after the

fixture is hung.

10. Install the light bulbs (not provided) in

accordance with the fixture's specifications.

(DO NOT EXCEED MAXIMUM WATTAGE RATING)

1 2 3

No comments

Golden-lighting 1821-6 BI User Manual Page 2