Assembly Instructions: 9942-WSC GL (Aiyana)
IMPORTANT:
• ALL INSTALLATION WORK SHOULD BE DONE BY ACCREDITED PROFESSIONAL.
• SHUT OFF POWER SUPPLY AT FUSE OR CIRCUIT BREAKER!
• USE ONLY THE SPECIFIED BULBS. DO NOT EXCEED THE MAXIMUM WATTAGE!
PREPARING FOR INSTALLATION
Carefully remove all of the contents from the carton. See the
important notes above. Shut off the power at the circuit breaker
andcompletelyremovetheoldxturefromthewall,including
theoldmountingstrap.
Mountingstrap(A)containsseveralpairsofthreadedholes.
Findthepairofholesthatmatchesthespacingoftheholeson
thejunctionboxandyourxturebackplate.Twoofmounting
screws(B2)shouldbeattachedtomountingstrap(A).You
mayneedtotightenthenutsthatholdthesescrewsinplace.
Pullthehousewiresthroughthecenterofmountingstrap(A).
Placemountingstrap(A)overthejunctionboxsothatmounting
screws(B2)arehorizontal,andinalignmentwiththehole
locationsonthexturebackplate.Securemountingstrap(A)to
thejunctionboxwithmountingscrews(B2)andascrewdriver.
Tightenthescrewssecurely.
CONNECTING THE WIRES
Haveanassistantsupportthextureweightwhilecompleting
thewiring.Cutawayanyexcesswires.Threadthexturewires
throughthecanopy.Attachthexture’swirestothepower
supplywiresfromthejunctionbox.Connectblacktoblack(or
smooth);whitetowhite(orribbed);groundtoground(greenor
copper).Twisttheendsofthewirepairstogether,thentwiston
a wire connector. Make sure all twists are in the same direction.
Ifthereisnogroundwire(greenorcopper)fromthejunction
box,locategroundscrew(E)onmountingstrap(A)andwrap
thexturegroundwirearoundthegreengroundscrew(E).Use
ascrewdrivertosecuregroundscrew(E)ontothemounting
bracket.Tuckallwiresneatlyintothejunctionbox.
FINISHING THE INSTALLATION
Placethexturebackplateovermountingscrews(B1)sothat
theyprotrudethroughtheholesinthefrontofthebackplate.
Threaddeconuts(C)ontomountingscrews(B1).Twistuntilthe
backplateofthextureissnugagainstthewall.
Installhalogenbulbs,glass(S),andglass(L)inaccordancewith
thediagramabove.
Bulb Note: Use a tissue or paper towel to hold the bulb and
push down into the socket. Oils and dirt can cause the bulb life
toshorten.Rubbingalcoholisrecommendedtocleanthebulbs
when needed.
Your installation is now complete. Turn on the power and test the
xture.
CLEANING TIPS
Treat the xture gently! Regular cleaning will reduce the need for deep cleaning. For regular cleaning, turn off the light and wipe down the
xture with a clean lint-free cotton or microber cloth. Never spray cleaner directly onto the xture.
For Customer Service, contact
the place of purchase to arrange
for replacement parts.
BLACK
(Hot)
WHITE
(Neutral)
GREEN
(Ground)
HOUSE WIRES
SMOOTH
(Or Black)
FIXTURE WIRES
RIBBED
(Or White)
BARE COPPER
(Or Green)
L
L
L
L
L
L
S
S
S
S
TOTAL
3PCS
L
TOTAL
6PCS
A
B2
B1
C
Comments to this Manuals