Golden-lighting 8107-BA2 WG User Manual download pdf

Assembly Instructions: 8107-BA2 WG (Torbellino)

IMPORTANT:

• ALL INSTALLATION WORK SHOULD BE DONE BY ACCREDITED PROFESSIONAL.

• SHUT OFF POWER SUPPLY AT FUSE OR CIRCUIT BREAKER!

• USE ONLY THE SPECIFIED BULBS. DO NOT EXCEED THE MAXIMUM WATTAGE!

PREPARING FOR INSTALLATION

Remove all of the contents from the carton. See the important

notes above. Shut off the power at the circuit breaker and

completelyremovetheoldxturefromthewall,includingthe

oldmountingstrap.

Mountingstrap(B)containsseveralpairsofthreadedholes.

Findthepairofholesthatmatchesthespacingoftheholeson

thejunctionboxandyourxturebackplate.Twoofmounting

screws(A)shouldbeattachedtomountingstrap(B).You

mayneedtotightenthenutsthatholdthesescrewsinplace.

Pullthehousewiresthroughthecenterofmountingstrap

(B),placemountingstrap(B)overthejunctionboxsothat

mountingscrews(A)arehorizontal,andinalignmentwiththe

holelocationsonthexturebackplate(F).Securemounting

strap(B)tothejunctionboxwithmountingscrews(D)anda

screwdriver.Tightenthescrewssecurely.

CONNECTING THE WIRES

Attachthexture’swirestothepowersupplywiresfromthe

junctionbox.Connectblacktoblack(orsmooth);whiteto

white(orribbed);groundtoground(greenorcopper).Twistthe

endsofthewirepairstogether,thentwistonawireconnector.

Make sure all twists are in the same direction. If there is no

groundwire(greenorcopper)fromthejunctionbox,locate

groundscrew(E)onmountingstrap(B)andwrapthexture

groundwirearoundthegreengroundscrew(E).Usea

screwdrivertosecuregroundscrew(E)ontothemounting

bracket.Tuckallwiresneatlyintothejunctionbox.

FINISHING THE INSTALLATION

Placexturebackplate(F)overmountingscrews(A)sothat

theyprotrudethroughtheholesinthefrontofthebackplate.

Threaddeconuts(G)ontomountingscrews(A).Twistuntilthe

backplateofthextureissnugagainstthewall.

Slideglassshades(H)overthesocketsandsecuretheglass

inplacebytighteningsocketrings(I)ontothesockets.

Installthelightbulbsinaccordancewiththexture’s

specications.Donotexceedthemaximumwattage.

Your installation is now complete. Turn on the power and test

thexture.

CLEANING TIPS

Treat the xture gently! Regular cleaning will reduce the need for deep cleaning. For regular cleaning, turn off the light and wipe down

the xture with a clean lint-free cotton or microber cloth. Never spray cleaner directly onto the xture. For deep cleaning, turn off the

light and remove the glass prior to cleaning. Place the glass shades aside to clean one at a time. Hand wash glass with warm water

and mild detergent. Dry with a lint-free or microber cloth.

BLACK

(Hot)

WHITE

(Neutral)

GREEN

(Ground)

HOUSE WIRES

SMOOTH

(Or Black)

FIXTURE WIRES

RIBBED

(Or White)

BARE COPPER

(Or Green)

For Customer Service, contact

the place of purchase to arrange

for replacement parts.

Summary of Contents

Page 1 - CLEANING TIPS

Assembly Instructions: 8107-BA2 WG (Torbellino)IMPORTANT: • ALL INSTALLATION WORK SHOULD BE DONE BY ACCREDITED PROFESSIONAL. • SHUT OFF POWER SUPPLY

Comments to this Manuals

No comments

Golden-lighting 8107-BA2 WG User Manual

Browse online or download User Manual for Lighting Golden-lighting 8107-BA2 WG. Golden Lighting 8107-BA2 WG User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Lighting Golden-lighting 8107-BA2 WG