Golden-lighting 6390-WSC WG User Manual Page 1

Browse online or download User Manual for Lighting Golden-lighting 6390-WSC WG. Golden Lighting 6390-WSC WG User Manual

  • Download
  • Add to my manuals
  • Print
  • Page
    / 2
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 0
F For Customer Service, contact the place of purchase to arrange for replacement parts.
CSA063902WALG1
INSTALLATION INSTRUCTIONS
Fixture Name: CORONADA 6390-WSC WG
For Wall Mount Light Fixture
WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER
Fig. 1
Fig.2
HANGING THE FIXTURE (Fig.1)
1. Carefully remove the new fixture from the carton
and the yellow parts bag. Check that all parts are
included as shown in the illustration and parts list.
2. Shut off power at the circuit breaker and remove
the old fixture from wall, including the old
mounting strap.
3. The Mounting Strap (A) contains several pairs of
threaded holes, find the pair of holes that match
the holes spacing in your fixture Back Plate (D) and
thread the Nipple (C) half way into the Fixture
Mounting Strap (A).
4. Place the Mounting Strap (A) over the Junction
Box, as required by the fixture type.
5. Attach the Fixture Mounting Strap (B) to the
Junction Box using the two Mounting Screws (B).
Tighten the Screws (B) securely with screwdriver.
CONNECTING THE WIRESFig.2
6. Attach the power supply wires to the fixture lead
wires by connecting BLACK to BLACK (or SMOOTH)
and WHITE to WHITE (or RIBBED).
7. Attach the GROUND wire (GREEN or COPPER)
from the Junction Box and the fixture Ground wire
to the green Ground Screw on the Mounting
Bracket (B) or connect both wires together using
the correct size of wire connectors.
NOTE: Twist the wires together in the same direction
you twist the wire connector onto the wires.
8. Tuck these wire connections neatly into the
Junction Box.
FINISHING THE INSTALLATIONFig.3
9. After tucking these wire connections neatly into
the Junction Box and place the fixture Back Plate
(D) over the Nipple (C) and secure the Back Plate
(D) against the wall by threading Deco Nuts (E)
over the Nipple (C) until tight as shown on Fig.3.
10. Install glass as per the fixture assembly
instructions.
YOUR INSTALLATION IS NOW COMPLETE. RETURN
POWER TO THE JUNCTION BOX AND TEST THE FIXTURE.
Fig.3
JUNCTION BOX
D
C
B
A
FIXTURE WIRES
SMOOTH
(or Black)
RIBBED
(or White)
BARE COPPER
(or Green)
HOUSE WIRES
BLACK
(Hot)
WHITE
(Neutral)
GREEN
(G
round
)
JUNCTION BOX
D
CE
Page view 0
1 2

Summary of Contents

Page 1 - INSTALLATION INSTRUCTIONS

F For Customer Service, contact the place of purchase to arrange for replacement parts. CSA063902WALG1 INSTALLATION INSTRUCTIONS Fixture Name: CO

Page 2 - PARTS LIST

For Customer Service, contact the place of purchase to arrange for replacement parts. CSA063902WALG2 PARTS & ASSEMBLY SHEET This fixture asse

Comments to this Manuals

No comments