Golden-lighting 6005-BA2 RBZ User Manual Page 2

  • Download
  • Add to my manuals
  • Print
  • Page
    / 2
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 1
For Wall Mount Light Fixture
INSTALLATION INSTRUCTIONS
WARNING ! SHUT OFF POWER AT FUSE OR CIRCUIT BREAKER.
Fixture Name: Landcaster 6005-BA2 PW/RBZ/AB
For Customer Service, contact the place of purchase to arrange for replacement parts.
Fig. 3
Fig. 1
Fig. 2
HANGING THE FIXTURE (Fig. 1)
1. Carefully remove the new fixture from the carton and the
yellow bag that holds all your parts. Check that all parts are
included as shown in the illustration and parts list.
2. Shut off power at the circuit breaker and remove the old
fixture from wall, including the old mounting strap.
3. The Mounting Strap (A) contains several pairs of threaded
holes. Find the pair of holes that match the hole spacing in your
fixture Back Plate (K). Thread the two Mounting Screws (B)
halfway into the Mounting Strap (A).
4. Place the Mounting Strap (A) over the Junction Box (E) so the
Mounting Screws (B) are horizontal.
5. Attach the Mounting Strap (A) to the Junction Box (E) by using
the two mounting screws (D). Tighten the screws securely.
CONNECTING THE WIRES (Fig. 2)
6. Attach the power supply wires to the fixture lead wires by
connecting BLACK to BLACK (or SMOOTH) and WHITE to
WHITE (or RIBBED).
NOTE: Twist the wires together in the same direction you twist
the wire connector onto the wires.
7. Attach the GROUND wire (GREEN or COPPER) from the
junction box and the fixture ground wire to the green ground
screw on the Mounting Bracket (A). Or, connect both wires
together using a wire connector.
8. Tuck these wire connections neatly into the junction box.
FINISHING THE INSTALLATION (Fig. 3)
9. Place the fixture Back Plate (K), over the Mounting Screws
(B), so they protrude through the holes in the Back Plate (K).
10. Thread the Deco Nuts (L) onto the Mounting Screws (B) and
continue turning until the Back Plate (K) is snug against the wall.
11. Install glass according to the fixture assembly instructions.
YOUR INSTALLATION IS NOW COMPLETE. RETURN
POWER TO THE JUNCTION BOX AND TEST THE FIXTURE.
JUNCTION BOX
E
A
G
F
D
B
C
K
I
L
H
J
HOUSE WIRES
WHITE
BLACK
RIBBED (WHITE)
SMOOTH (BLACK)
FIXTURE WIRES
Page view 1
1 2

Comments to this Manuals

No comments