INSTALLATION INSTRUCTIONS
WARNING ! SHUT OFF POWER AT FUSE OR CIRCUIT BREAKER.
Fixture Name: Riverton 1567-BA2 PC
For Wall Mount Light Fixture
For Customer Service, contact the place of purchase to arrange for replacement parts.
Fig. 3
Fig. 1
HANGING THE FIXTURE(Fig.1)
1.Carefully remove the new fixture from the carton and the
yellow bag that holds all your parts. Check that all
parts are included as shown in the illustration and parts list.
2. Shut off power at the circuit breaker and remove the old
fixture from wall, including the old mounting strap.
3.The Mounting Strap (A) contains several pairs of
threaded holes, find the pair of holes that match the holes
spacing in your fixture Back Plate (K) and thread the two
Mounting Screws (B) half way into the Mounting Strap (A).
4.Place the Mounting Strap (A) over the Junction Box (E)
so the Mounting Screws (B) are vertical or horizontal, as
required by fixture type.
5. Attach the Mounting Strap (A) to the Junction Box (E) by
using the two Junction Mounting Screws(D). Tighten the
screws securely.
CONNECTING THE WIRES (Fig. 2)
6. Attach the power supply wires to the fixture lead wires by
connecting BLACK to BLACK (or SMOOTH) and WHITE to
WHITE (or RIBBED).
7. Attached the GROUND wire (GREEN or COPPER) from
the Junction Box and the fixture Ground wire to the green
Ground Screw on the Mounting Strap (B) or
connect both wires together using the correct size
of wire connectors
NOTE: Twist the wires together in the same direction you
twist the wire connector onto the wires.
8. Tuck these wire connections neatly into the unction Box.
FINISHING THE INSTALLATION (Fig. 3)
9. Place the fixture Back Plate ( K ), over the Mounting
Screws (B), so it protrude through the hole in the Back
Plate ( K ).
10. Thread the Deco Nuts ( L ) onto the Mounting
Screws (B) and continue turning until the Back Plate (K) is
snug against the wall .
11. Install light bulbs and glass shade as per the fixture
assembly instructions
YOUR INSTALLATION IS NOW COMPLETE. RETURN
POWER TO THE JUNCTION BOX AND TEST THE
FIXTURE.
BARE COPPER
(or Green)
GREEN
(Ground)
FIXTURE WIRES
SMOOTH ( or BLACK)
RIBBED ( or WHITE)
BLACK
(Hot)
WHITE
(Netural)
HOUSE WIRES
(2 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals